Tips and Faqs

Digital vinyl is like a printed “chrome” that can be ironed onto a t-shirt or other textile supports. It adheres using heat, which is applied using a special iron.

We recommend digital vinyl for small productions of t-shirts, jackets or other textile products of up to 50 units on which you want to print photographs or images with color gradients.

Cut vinyl is an adhesive extracted from a coil of a single color and the drawing is achieved by cutting and combining the vinyl coils of the desired color. This means that each color is a different vinyl and does not allow four-color processes or gradients.

We recommend cutting vinyl for small productions of t-shirts, jackets or other textile products of up to 50 units, in 1 or 2 colours. It is also suitable for large-format lettering (windows, posters, automobiles, decoration, among others).

Pad printing consists of engraving an iron plate with the desired drawing. This plate is dipped in ink so that the rubber pad is impregnated with the drawing of the iron plate and is applied to the selected product.

Pad printing is recommended in cases of products that have a reduced marking surface, such as pens or key rings, among others.

Screen printing consists of transferring ink through a stretched gauze on a frame or stretcher. This assembly is called a “silk screen”. Therefore, the gauze must be sealed in the parts where it is not desired to allow the passage of the ink. It is achieved by means of an emulsion, varnish, adhesive tape or photosensitive emulsion. The gauze shows a negative aspect of what will later be the final print. The serigraphic screen is placed on top of the support to be printed and the ink is passed through the gauze, applying moderate pressure with a doctor blade.

We recommend screen printing especially for t-shirts and textile products from approximately 50/60 units (depending on the size of the marking), as long as the printing is done in one colour. Otherwise, another more appropriate technique will be valued.

Sublimation is a new marking technique that works by transferring color to a polyester fabric through the application of heat.

The design is printed on special sublimation paper and placed on the fabric to be marked. Then, thanks to the heat applied by means of a special plate, the inks on the paper go from the solid state to the gaseous state, to later return to the solid state and, thus, remain printed on the fabric.

The result is a quality finish in full color and resistant to countless washes. This technology is not applicable to cotton, fiber or similar fabrics. It should only be applied on polyester.

We recommend it for four-color printing and small print runs on a white item. Also to carry out large 100% customizable productions. In this case, the textile article is made according to the customer’s needs.

Digital vinyl is a white adhesive support, where any element can be printed by inkjet. Cut vinyl is also an adhesive support, but in this case it works with coils of different colors, so that the drawings are achieved by cutting these coils and combining the colors according to the desired design.

Digital vinyl allows four-color printing (photographs, for example); and make gradients; Otherwise, the cut vinyl only allows you to print solid masses of colour.

We recommend both techniques to print up to 50 approximate units (small productions) of t-shirts, jackets or other textile products. The cut vinyl is ideal for stamping designs of 1 or 2 colors.

Digital vinyl, however, is the best option if you want to print images or drawings with color gradients.

Finally, cut vinyl is also a good option for large-format signage (windows, posters, automobiles, decoration, among others).

Screen printing consists of applying the ink directly on the piece to be stamped through an emulsion and engraving process.

On the contrary, vinyl is a plastic adhesive that is attached to the piece to be stamped using an iron that emits heat.

Screen printing is recommended above all for printing t-shirts and textile products from 50/60 units (depending on the size of the marking).

Instead, vinyl is recommended for productions of less than 50 units.

Both pad printing and screen printing use inks.

However, in screen printing, screens with a weft of threads are used. The part that is not drawing is darkened and the ink passes through only through the undarkened threads.

In contrast, pad printing consists of engraving an iron plate with the desired drawing. Ink is then placed on the iron plate. Finally, as the name of the technique indicates, a rubber pad is impregnated with the drawing of the iron plate and applied to the selected product.

Pad printing is normally used to personalize small parts; for example, key rings and pens.

On the contrary, screen printing is considered indicated for larger pieces.

The cost of embroidery is higher than that of other marking technologies; however, it is the technique that offers more durability and, depending on the promotional objective, a better finish.

The price can only be determined from the size and colors of the embroidery, since it depends on the number of thread stitches needed to make the marking.

The cost of screen printing screens or molds is €35 for standard formats (50×60 cm). For larger sizes, contact us and we will offer you a personalized price.

Yes, as long as its fabric is technical. The minimum production required is 500 units. It is also necessary to have a certain margin of time for the manufacture of the t-shirts. If the clothing is made in Spain, it can be ready after 30 or 40 working days; If you prefer to produce in Asian countries, it will take 90 days.

The design is tailored to the client’s needs, so it is difficult to establish exact deadlines; it all depends on the complexity of the design and the urgency of production.

The first proposal for a logo design, for example, once the budget is approved, can be sent after about a week. From this point, the necessary modifications will be applied.

In the case in which the design is already applied to the promotional product, we can deliver the “mock up” within approximately 2 days.

It is important to emphasize that these are approximate terms, since each client and design is different and unique.

Digital printing technologies allow you to print with as many colors as you like, just like a photograph. However, cutting vinyl and pad printing allow stamping or printing between 1 and 8/12 colors.

Yes, as long as the fabric of this is technical. The minimum production required is 500 units. It is also necessary to have a certain margin of time for the manufacture of the t-shirts. If the clothing is made in Spain, it can be ready after 30 or 40 working days; If you prefer to produce in Asian countries, it will take 90 days.

A vector drawing, unlike raster images (which are made up of a certain pixel grid), is created from geometric coordinates on a plane.

This allows it to be scaled as much as necessary, while at the same time allowing you to work with sophisticated cutting technologies. These are machines that, through the use of specific software, have the ability to follow the path of a vector.

In this way you can get flat pieces, for example letters made with cut vinyl; or with volume, for example a logo made with wood or metal.

On all products we can offer a scalable discount based on the quantity of the order. At the time of giving you the budget, we can specify the rate scale according to quantity.

For example, the unit cost of 100 simple pens is around €1/unit. If 1,000 pens are purchased, the unit cost can drop to €0.65/unit.

You can come to pick up the products personally, and we also have a delivery service with a transport agency, which will send the material where you tell us.

Shipping throughout the Barcelona area is free (for orders over €300). For smaller orders, the transport price is only €10+VAT. Your invoice will show the transportation broken down as an independent concept.

Shipping throughout the Barcelona area is free (for orders over €300).

For smaller orders, the transport price is only €10+VAT. Your invoice will show the transportation broken down as an independent concept.

We would study the case and offer you a solution, since each order and product is unique.

Normally, the replacement of the product will be offered; If we do not have a time frame and as long as the product meets the minimum requirements, we will offer you a special price.

In any case, we are sure that this will not happen and that you will be delighted with the purchased product!